Hobby Workbench Bottle and Tool Organizer

This little caddy holds slot car lubricants, plastic weld (Plastruct Plastic Weld is good for regular models and 3D prints alike), decal sovents and sets, mini screwdriver sets, body putty, sd cards and miscellaneous other things useful in the slot car world.

I printed this with an off brand PLA+ and turned our remarkably well.

Brim is not required unless you have a warping issue. Infill was set at 10%. Lightweight yet still strong for its purpose.

The back row from left to right is

76mm W X 19mm D (yellow screw driver holder in pics)

52mm W X 15mm D (red screw driver set in pics)

13mm W X 20mm D

40mm W X 16 mm D (perfect for SD Card in holder)

29mm W X 20mm D (9V battery holder)

Middle row of bottle holders left to right...

45mm Diameter

38mm diameter

30 mm diameter

30 mm diameter

Offset end bottle holder

32mm (plastic med bottle)

Front row of bottle holders left to right...

32mm diameter

30mm diameter

30mm diameter

Front left slot

11mm W X 37mm D

Front center slot will lower front wall

62mm W X 8mm D

Front Right box

24mm W X 27mm D

All compartments are 23mm tall