IP5328P Powerbank Case with Loop for 60x105 battery

Modeled and printed this back in the summer of 2022. Sadly, the battery have already degraded significantly when I finished modeling & printing this but I still see value in this model I made.

Remix it on Onshape: 

https://cad.onshape.com/documents/5d9c11e2b2cdbc1ef87a50a4/w/341219a4e13221d4281b1d8b/e/650074643dd346bed97aa206?renderMode=0&uiState=63d873e1932c9021e6218027

Materials:

• x1 60mmx105mm Li-Po or “Pouch” Battery
• x1 IP5328P Battery Charger Circuit Board (https://www.aliexpress.us/item/2255800029749260.html)
• x2 M2x8mm Countersink Screws (To close the case)
• x4 M2.5x4mm Countersink Screws (To secure the PCB)
• x4 Wires (I used 22AWG/Gauge)
• A matching pair of JST-XH Connectors

Behind the scenes stuff: 

I had planned to place the PCB above the battery increasing the thickness while cutting down on the length and integrate a place for an wireless charger but that's too much ask for my current CAD skill.