Vice jaws for bicycle maintenance

Remix of the original design by aiber.
88
200
2
1500
updated August 28, 2020

Description

PDF

Remix of the original design by aiber. I narrowed the pads down so they would consume less plastic to print, made the text markings larger so they'd show up better when printed, and added three holes to each to fix 8x3mm rare earth magnets so they hold themselves in place on the vise jaws.

Print instructions

Category: Tools Summary

Remix of the original design by aiber. I narrowed the pads down so they would consume less plastic to print, made the text markings larger so they'd show up better when printed, and added three holes to each to fix 8x3mm rare earth magnets so they hold themselves in place on the vise jaws.

Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 100%

Filament: eSun PETG translucent blue
Notes:

Print at 100% or as close as possible, because if you use infill and then clamp something in these jaws, they might crush before they get sufficient purchase. This does mean that they will consume quite a bit of plastic, which is part of why I shrank them down from the original.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License