I used this to generate a bin for my v6, mk8 an volcano nozzles. Had to paste the files from the gridfinity rebuild project into the folder (which wasn't documented well) and had to mess around in the utility file to get the holed to stick out at the top after making the inside of the bin taller. Also added a filament change for better readability
Had a variety of nozzles that were at risk of getting mixed up. Less likely now. Made in all four diameters Prusa firmware supports (.25, .4, .6 and .8mm). Removed the side spots on the .25 because of text size
All printed using the .6 mm nozzle using PrusaSlicer's variable height and Jayo black PLA
same for me. The folder gridfinity-rebuilt-openscad inside the zip is empty.
@bond2k_476456 ok, just found out you need to copy the contents of that folder from the original version: https://www.printables.com/model/310731-customisable-gridfinity-nozzle-holder-openscad
@RileyEnginerd_83070 just found out you need to copy the contents of that folder from the original version: https://www.printables.com/model/310731-customisable-gridfinity-nozzle-holder-openscad
