Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mould? Do you want to be a god?
This serves as the definitive, most easy to print, assemble, and “”playable"" version of this model.
Still not an easy build! Recommended for those who know their way around machines and material as this deals with PETG and TPU, as well as optimising parts for max strength
This wouldn't have been possible without the amazing work done by Petergross3 and Warboy on thingiverse. Kudos to them.
Featuring a ton of functional and aesthetic upgrades, all responsible for easier printing, assembling and structural improvements. He can even pull off some decent action poses.
I printed him at 85% scale so he stands at about 30cm. I recommend printing no smaller than that as I already had trouble with the matrix and ion blaster at that scale. Files for his weapons and accessories aren't included here as I didn't edit them.
Fully transformable and mobile.
Notes:
Some files need to be mirrored in your slicer, and not all parts are orientated for best printing results.
Orientation important on any parts with pin holes, hinges, will require your own judgement.
Legs and thighs need to print upright to have clean interiors for joints.
Spine needs clean printing for transformation.
harder TPU the better, maybe anything is or above 97A shore hardness.
Please refer to blender file on how to put together.
Higher infill or increased wall line count recommended for Legs and feet, just to give some weight.
Hardware needed:
2mm pins/ M3 or M4 screws and nuts, some parts need to be glued / welded together.
CHANGE list:
Aesthetic accuracy upgrades:
Improvements that *coudl've* been made but I've already given up and this has taken too much time:
The author marked this model as their own original creation.