10x holder for 2mm engravable acrylic sheets

This is just a stand to hold up to 10 engravable acrylic plates. At 100% scale, the slots measure 76mm x 2mm.

Scale how you want.

I printed at 0.3mm layer height, and it looks meh (see photos), but it's utilitarian for me so I'm shooting for a shorter print time. If you care about it looking smooth, go way down to 0.15 or 0.1. 

Low infill ~15%

No supports

It has a big flat footprint, so you may want a brim to stop it from shrinking away from the bed.