Raspberry Pi Case for webcam live feed & HQ time lapse mode

This is a simple case housing a Raspberry Pi, a relay and a LED push button.

Raspberry 3B+ (will change later for the Zero 2 once it's back on stock for a smaller footprint case)
For livestream : Logitech C920 (will change for a fisheye one later)
For Time Lapse : Raspberry Pi HQ Camera with official 6mm lens.

The case is attached to the printer with double sided tape.

I'll add more info later but to summarize :

• A USB webcam is always running with a smooth live feed, homekit compatible (iOS) (using this soft)
• The relay boots and shutdowns the Raspberry Pi when I turn on and off the printer.
• At the end of the ribbon is a Raspberry Pi HQ Camera for Time Lapses.
• The button triggers the Time Lapse mode (using this soft) and blinks when active.
• A switch is inside the machine and is pushed with the printer's head to take a picture. (currently working on it)
• A second press of the button disables the Time Lapse and turns off the LED.
• All in a tiny little package attached to my printer.

I printed it in pink. How fashionable =D

GLOUPY