Ikea Önsklig bracket

We had a diaper changing table from Ikea and are using the Önsklig bucket. After a while the bracket holding the bucket started to bend and has been worn out, the bucket sometimes has just been falling off when too heavy. 

I could obiously have it screwed to the table, but I thought: “I have a 3D printer, lets recreate it.” So I used Fusion360 to recreate the bracket. 

You should definitely print with support. I used PETG with 100% infill. It sits now really tight on and still can be screwed to the table. The steps on the bevel probably happend because I printed it laying down, you could try haveing it stand but don't forget the support.