Prusa Spool Sorting Tower - Remix / Magnetic Version

Loved the original spool sorter, but wanted to change the container as not a fan of vase mode boxes so took the boxes from 'Storing Machine - based on prusament spool (upcycling prusament)' and redesigned them to fit.

NEW April 2022 - Magnetic Version (8x1mm Magnets) - Prusa Storage Magnet v2 8x1.3mf

Allows you to remove the storage box completely, better fit using magnets (8mm x 1mm magnets). The connector has a tight fit to the Container.

Clean the magnets then use superglue to attach.

Please post your makes, or let me know if anything needs changed/updated. Happy Printing.

Print instructions

Connecter - this is 9mm higher than the original high version. I have also included a 9mm ring so if you already printed the original one no need to re-print it all (I did this works perfectly).

Draw / Container - I printed at 0.2 as wanted quality, but 0.25 or 0.3 should be fine depending on your need. 10-20% infill for strength will work fine with less.

Remixed the Top with the hex pattern for MMU, non-mmu version with just the pattern.

Top disk

Clip - simply to make spool fit more snug - not required but recommend quick print. Stops everything wobbling