Phone stand for filming

Printed parts:
-table clamp                         x1(3cm or 5cm clamping height)
-swivel joint base                 x1
-swivel joint top                    x1
-M5 wingnut                         x1(x3 if 5cm table clamp is choosed)
-M8 wingnut                         x3
-Phone supp base                 x1
-Phone supp top                    x1

Bolts and nuts:
-M8 40mm bolt                     x3
-M8 hex nut                            x2
-M8 hex coupling nut            x1
-M5 20mm hex head             x2
-M5 nex nut                             x3
-M5 40mm hex head bolt      x1
-M5 50mm hex head bolt      x1
-M5 12mm socket head          x3
-M5 T-nuts                               x2

Print parameters and materials:

I used Esun PETG filament for the parts but abs will work as well.

nozzle diameter 0.5

layer height 0.3

infill 70%

Supports: YES

For more details check the video!