Catapistol... Pistapult?
Description
PDFFully 3D printed! No external parts or hardware - even the ammo is printed! This blaster is designed meticulously with 3D printing in mind, containing almost no overhangs greater than 45 degrees, allowing every part to print without any support material. Even many of the z seems are accounted for right in the CAD to keep tolerances consistent. Assembly instructions in photos and in a video through the following link- https://www.instagram.com/reel/Cn4pNa3pOQj/?igshid=MDM4ZDc5MmU=
Enjoy!
Slicing recommendations-
Orientation recommendations in photos. These settings are based on a .4mm nozzle, PLA, PrusaSlicer, and are all optional. Ensure the square fulcrum and the clips are oriented on their side for correct layer direction. I recommend printing the ammo in TPU. Printing the arm in TPU will make the blaster quieter.
| Notable variables | infill % | layer height mm | perimeters |
| trigger, main springs, trigger spring, fulcrum, clips | 100 | .2 or lower | 4 vertical and horizontal shells |
| arm, barrel, handle | 15-20 | .3 or lower | 4 vertical and horizontal shells |
| ammo (PLA) | 0 | .3 or lower | 2 vertical and horizontal shells |
Tags
Model origin
The author marked this model as their own original creation.
