Terrible and poorly designed replica of the original Third Dimension Dabs hashhole press. Don’t get played, get the one that is trusted by the industry. There is proof that it was done first by Third.
@third_dimension_dabs on IG
Printthirddimension.com
I've been printing longer than the two hours Mark has, so I was able to re-orientate the body to print on top/bottom without the need for supports
The lid was too large like the other comments have said and reprinted a second one that fit
Would be perfect, sadly the press don’t fit. I’ll try sanding it down with sandpaper.
The press is too wide to fit in the box. box id = 37.7 x 56.9 The press is 39.1 x 58.1 Also your stl has the box and the press on it's side so slicing makes a ton of support. Not well done
