2023 Stackable rotary drink dispenser

2023 Stackable rotary drink dispenser, improved from model 2022 Add Split models for small beds
769
2519
16
17 k
updated January 2, 2025

Description

PDF

2023 Stackable rotary drink dispenser, improved from model 2022.
which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors. 
https://www.printables.com/es/model/250799-drink-dispenser-different-models

**09 February 2023 _ Small modification in the upper dowell position for narrow wall, especially for 0.6/0.8 nozzles, added xxxxx_V1.stl extension to the models (does not affect you if you have 0.4 nozzle). Download all models if you use V1.   

 **26 February 2023_ Added directory with V3 files split for prusa mini small bed 180x180), 
 

**28February 2023   Center piece of 25 mm, to scale it to the size you want to get the correct size, the connecting pins you will have to use twice as many or longer ones stl spacer1 and spacer 2 . (see image)

Model TOP RIGHT and TOP LEFT, for 10 beverage cans of 66 x 115 mm diameter, this model should always be made, you can make only this one to hace only one floor


Model BOTTOM RIGHT and BOTTOM LEFT, to make stackable as many as you need.

 

Add models Split models for small beds (180X180 minimum to top model, and 200x200 bottom model)  (see photograph) ,  add pines union 6x20 and little 3x10. 

Models split :  

  • Top left split 1 and Top left split 2.   -           →  TOP LEFT 
  • Top right split 1 and Top  right split 2.         →  TOP RIGHT
  • Botton left split 1 and Top left split 2.          →  BOTTON LEFT
  • Botton  right split 1 and Top  right split 2.   →  BOTTON RIGFHT 
  • Added union pins files, I recommend to use wooden pins, but they can be printed anyway
  • Added anti-skid feet, make them in BOUN - TPU, etc , normally they are not necessary.

 

The stackable, is obtained by means of dovetail, fitting both pieces and preventing the complete movement even upwards, for the assembly it is necessary to clip first one side and then the other.  
For the clipping between them, we recommend dowels 6 mm x 30 wood, specially designed for it, but if you want, I leave also model to print. 
I leave a small reference in the images for those that we fight the Covid 19 with the construction of visors of disinterested form, (especially to the group of Zaragoza, Aragon (Spain), with Artillery X1  

I hope you like it.  

I recommend to buy wooden dowels D6 x 30 mm.

Please check the flow of your printer, if the pins do not fit, you may be using more material than you should. 

 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

modificado modelo inferor, con largueros mas altos, para poder apilar , 

añadido entrantes en modelo superior para que encajen

 

License