Wowstick 1F + Rugged Case

Update V1.1 (Loose fit .2mm each side)

As some of You can have a problem with fitting inserts into box as it was realy tight fit, I've added an stl to a bit bigger box 0,4mm in x and 0,4mm in y so there will be .2mm on each side, it will still be tight but not as V1. 
For me it was faster to print the box rather than inserts so it will less time and filament to replace if needed. 
Thank You for the feedback.

Design

I've printed ts100 case(https://www.printables.com/pl/model/345083-rugged-multipart-pinecilts100ts80-case-v2) and i love that design so much, so designed one also fo my wowstick 1f+. Check the links in the remix section to check my inspiration. 

Printing & Assembling

I would recommend printing at a 0.2mm layer height. 2 latches are needed. CA glue can be used to fit the inserts and case together. However in mine the inserts fit the case so well, I didn't even need to glue the them. I printed everything with PET-G but any material can be used i think. If You will have any sugestions feel free to leave a coment. 

It took me 33h of actual print time to print all parts with .2 layer height, .4mm nozzle and ironing turned on.