I modeled this is a display to show off Adventure Time mini-figures. The black 'backers' have holes in the rear to mount on a wall and notches on the top to add mini-figure display plates.
I have also attached the base vectors to serve as a jumping off point if anyone wants to tinker with them.
Enjoy!
I printed this with a combination of manual color changes and gluing separate prints, the files are structured in a way such that using a Multi-Material system should be very simple.
Notches on the top of 'ADVENTURE' and 'TIME' require support.
The tolerance with the blade and TIME Backer can be tricky, I have added tolerance in the final upload, but be prepared to print a tester blade.
The author marked this model as their own original creation.