Elegoo Neptune 3 Tool Holder

This is my original design for a better tool holder for the Elegoo Neptune 3.

Why?
My problem with other designs has been that they're too wobbly, and some are hard to print without extensive supports. Also the tools were often too loose and would rattle during printing.

Details
This holder slides into the v-slot at the top-right of the printer, and is supported with the original screws that come with the printer. It holds the 5 hex wrenches, the bigger scraper, 2 wrenches, the 2 screwdrivers, and the snippers.

Supports and Printing
I print the model on its top, and it can be printed without supports, although I do add minor supports to the 2 screw holes. My model is optimised for .6mm nozzles, as that's all I use. I printed mine in PLA.

Remixing
For those who use Onshape, the model can be copied and remixed at:
https://cad.onshape.com/documents/9276e8cd3b1b3830877b95cd/w/0474021ac3bc30fa9abc4a73/e/e2ab3ce57f858e55dc208aa8

I've also included a STEP file, but let me know if you'd like it uploaded in any other format!

Enjoy!!!