Update: Download now includes the hex bit holder STL from https://www.thingiverse.com/thing:1118772
I designed this pegboard tray so that I could put the hex bit holders I had previously printed https://www.thingiverse.com/make:671060 on my pegboard. This way it is easy to take the bits with you if needed. They just lift out of the tray.
I printed at 0.3mm just for speed of print.
The inside dimension of the tray is about 57.5 mm by 76.6 mm.
It is sized to fit on a 1/4 inch pegboard with 1 inch on center spacing.
I used 3D-Fuel Pro PLA for this print. It is really strong and flexible and easy to print and it can be annealed to get more strength and temperature resistance. It is my go to filament for functional prints.
I included the fusion 360 file and Step file for ease of remixing.
Printer: Qidi Tech X-Max (no longer own, I now have upgraded to a Mk3S+)
Rafts: No
Supports: Yes
Resolution: 0.3mm
Infill: 10%
Filament: 3D-Fuel Pro PLA Industrial Grey
Post-Printing =============
Just remove the supports under the top pegs.
The author marked this model as their own original creation. Imported from Thingiverse.