I drew the whole Logo new by myself, because i love the old Logo.
Here it is, for you with the original dxf .. if you want to prit it with a MMU in 3 differnt colors and not want to paint it by hand .. or whatever.
Printed in PLA
Just play around with the wide and highed .. i used 60% X and Y and 80% for Z for the plate.
For all other Parts i used 60% for X and Y. I found it nice for the other parts to look over the edge, so i printed them with a highed of 50% (1,5mm)
Keep i mind that the lines are different!
I numbered the letters, just to be sure you set the right letter to the right place, not sure if they are mixable.
Have fun.
I'm sorry thistime, the .3mf are for PrusaSlicer 2.3.0, i used a Infillpattern that 2.2.0 does not support. So, use the alpha, wait till release or slice the files yourself from the .stl's
The author marked this model as their own original creation.