Hi,
Originally started as an enclosure for the beautiful NTP clock made by W8BH
http://w8bh.net/NTP_DualClock.pdf
but of course useable for anything in need of a 2.2" SPI LCD TFT Display
and a Wemos D1 mini.
As shown in the pictures, the D1 mini has to go in the slot until the isolators of the pins touch the PLA. (you may have to file a chamfer on the circuit board to get it all the way in :-) )
If you want, you can carefully melt the pin protruding through the screw holes of the display with your soldering iron to lock it in place but it' is not really necessary.
Have fun.
WIlfred
For the back side set support on build plate only.
The front side doesn't need support.
The author marked this model as their own original creation.