Logitech Streamcam Mount with Joint (Remix)

Streamcam webcam mount with joint to fit on a 3/8" boom or microphone mount
22
144
2
956
updated January 17, 2023

Description

PDF

Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d

Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design.

  • Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts suitable for manually adjustment of the joint.
  • The camera grip is tapered to fit the Streamcam body better, similar to the OEM grips. 
  • The base of the joint has a female 3/8" 16 UNC threaded connector suitable for many microphone and boom mounts.

Recommended print settings

I recommend printing the parts separately. All parts can be printed without supports.

  • Camera grip - print with 0.2mm layer height and 3 perimeters.
  • Joint - print with a 0.12mm layer height, or adaptive layers for the threaded base. Orient with the threaded hole at the bottom.
  • End nuts - print 2 of them, with a 0.12mm layer height, or adaptive layers. Use the fuzzy skin option for the outside perimeters for better grip. Orient with the threaded hole at the top.
  • Bolt thread - print with 0.2mm layer height. If the thread is too tight try reprinting with the printers flow rate reduced by 10%.

Tags



Model origin

The author remixed this model.

License