nice model
Print-in-Place Twisty Puzzle Box - Difficult
A ready-to-solve twisty puzzle box. No glue, no hardware, no assembly, and more difficult than ever!
253
1663
46
6040
updated April 1, 2024
Makes
Comments
Great looking print :)
Cool puzzle. Flawless print in place and fun to solve. Printed in dirt cheap esun grey PLA. Thank you for sharing!
Even if the filament was cheap, your print has a nice nearly-matte look to it :)
I made this and put a clue for a treasure hunt inside. Its challenging yet very fun! Keep up the great work!
That's fantastic! Thank you for making this model part of your treasure hunt :)
Update: got the screw out by screwing a real screw into it and pulling it out. Printed new one with carbon fiber pla. Printed it at 98% so it wouldn't stick this time. all is working now. Thanks for the nice puzzle.
Any way to fix a broken key? Went in about 75% ok and then seized. Tried to turn and it busted. The rest moves and rattles and the print is excellent - just want to know if I can save the bottom? (edited)
@introspect_2630503 I'm glad you were able to fix it by scaling it down! Unfortunately the key is a weak point in my design.
If you DO need to print it again, any of these alternate keys are a lot stronger: https://www.printables.com/model/376543-alternate-print-in-place-puzzle-keys
@SamvanderLaa_2340673 Another great print! Thanks for posting :)
@setapart2_252450 I love the colors - maybe next year I should make a pumpkin-shaped case for it :)
Great print! One of the three prongs snapped upon reassembly but easy to glue
@filament_predicament I'm glad the repair worked! Nice print :)
@Crocmagnon I'm glad to hear it wasn't the other way around :)
The print turned out great!
@pleaxsy Turned out great!
Nice puzzle, got some problems, I suspect the screw came loose during printing and the thread didn't come out nice. Because of that, sometimes the key is hard to turn.
@EricWei_352080 I'm honestly a bit shocked it works at all with that shift - amazing!
Made this to mess around with on a road trip to Texas. I was messing with it before I left and I opened it up, so i didn't have much to do for the 16 hour trip but speed run it. The top got a bit stuck together, but I think I just need to lower my bed a bit to get it to work better. Made it with zero point two layer height, no supports, with PLA filament.
@3Dprintfun Looks great :) I imagine you're now far faster solving it than I am!