[Version 2] Mounting bracket for DJI Mic /w Insta360 X3

Bracket for mounting DJI Mic receiver with Insta360 X3.

Update: There is a Version 3 available now. V3 utilizing Ulanzi Hummingbird Quick-Release system, so the whole mounting adapter piece can be detached from the camera setup quickly. 

The downside is that Ulanzi Hummingbird Quick-Release is required. If you are OK with leaving the adapter on the stick, V2 is still good.

----------------------------------------------------------------------------------------------------------------

Version 2 is slimmer. It's 17.50mm thick, same as the receiver itself. Added curve to support left and right side of the camera, so it's a little more stable.

The receiver is now click in with added bump on the cold shoe connector.

v1
https://www.printables.com/model/363542-mounting-bracket-for-dji-mic-with-insta360-x3

related models
https://www.printables.com/model/359907-dji-mic-rx-reference-3d-model
https://www.printables.com/model/361256-insta360-x3-reference-3d-model