Models to Install LED Light in the Modular Lantern
Description
PDFThis project contains all model files and instructions to print the adapters and diffusers to install LED lights in the modular lantern.
Read all details about the electronics here.
Related Projects
How to Print Cylinder Base LR2268-71
Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm or 0.8mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Three perimeters |
| Prusa Slicer Profile: | “0.2mm Quality” |
How to Print Diffuser LR2268-61
Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm or 0.8mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Vase Mode Print! |
| Prusa Slicer Profile: | “0.2mm Quality” |
How to Print Diffuser LR2268-62
Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Three perimeters |
| Prusa Slicer Profile: | “0.2mm Quality” |
| Fuzzy Skin: | Height from 4.00–58.0: All walls. Height from 58.0-100.0: Outer walls. |
How to Print Diffuser LR2268-63
Use the prepared PrusaSlicer project in the file section, or check the table below.
| Nozzle Size: | Recommended 0.4mm, works with 0.6mm or 0.8mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PETG or PLA |
| Perimeters: | Vase Mode Print! |
| Prusa Slicer Profile: | “0.2mm Quality” |
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights:
Tags
Model origin
The author marked this model as their own original creation.
