Made a simple fidget toy for my daughter, and others have asked for the model, so here goes! I saw another model like this that had the parts together, however I remade it from scratch so the shape was easier to slide on.
It is in 3 parts, the main center, the nut/slider that goes on it, and the end cap that screws on. I made them separate so they can be printed different filaments as needed. Most often I print them in pairs so i can swap the slider between 2 different color filament.
No supports needed.
PLA works great.
0.20mm layer works (0.12 or 0.16 slide smoother)
Enjoy!
The author marked this model as their own original creation.