Lumintop FW4/FW4X glow in the dark insert

Glow in the dark insert for a Lumintop FW4X flashlight.

Unscrew the front lens cap and place it on the lens (between the lens and the LEDs) to install. Watch out for the T notch orientation modeled to fit the LED power wires (T notch should face the LED board).

Printed with Smartfil green glow PLA, 0.2mm layer hight, 90% infill.

You can also use the model to create a reverse mold and cast it in resin with glow in the dark powder mixed in.