Hanging Chicken feeding trough

A simple chicken feeder using a HT 110mm tube (HT DN110 Abwasserrohr).

I used some hot glue to attach the tube to the trough. Using two strings around the tube I hanged it to the ceiling of the chicken coop.

I printed this design with 35% infill.

Update: My chickens eat like pigs, therefore a lot is spread around the trough now, therefore I designed an extension for the existing V1 trough and uploaded a V2 design, which comes automatically with higher outer walls. Let's test! :-)

The extension fits quite well to the v1 and glue isn't necessary.

UPDATE 01.08.2020: I added a HT umbrella, for those who like to leave it in the rain, you can print either 4 times HT_umbrella with 8* HT_umbrella_dowel or if your printer is big enough: HT_umbrella_whole.