Hot swap SATA/SAS drive rails for Dell R510 and similar servers

Should be a replacement for drive caddies with model numbers: F238F/0F238F, G302, X968D, KG1CH.
10
110
0
1311
updated July 14, 2020

Description

PDF

Should be a replacement for drive caddies with model numbers: F238F/0F238F, G302, X968D, KG1CH.

Should fit Dell server models:
Dell PowerEdge R720
Dell PowerEdge R710
Dell PowerEdge R520
Dell PowerEdge R510
Dell PowerEdge R420
Dell PowerEdge R410
Dell PowerEdge R310
Dell PowerEdge R415
Dell PowerEdge R515
Dell PowerEdge T330
Dell PowerEdge T430
Dell PowerEdge T630
PowerVault MD1200
PowerVault MD1400
PowerVault MD3200
PowerVault MD3200i
PowerVault MD3400
PowerVault MD3600i
PowerVault MD3600f

Print instructions

Note that these rails do not lock - these were meant for a server that is racked and not getting touched or moved -- if you have a production datacenter where things get moved, or shipped around, you should buy actual caddies instead of crap you print off the internet!

Modeled based on existing drive blank plus some iteration. Pegs snap into drive screw holes; handle attaches to rails with two countersunk M3x8mm screws (like these). You can probably just ziptie the handles on if you want.

The CAD itself is available here.

Print rails pegs-up, print handle handle-up. Note that left and right rails are NOT symmetrical.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License