Carousel stands different sizes for 500ml bottles "Tershine"

Circular Bottle Holder designed to fit Tershine brand bottles and other car care products with slim 500ml bottles. created by request I have no use of it myself so no test print have been made. Please give me feedback and suggestions on printer settings and design changes needed to make it fit!

New 3 and 4 bottle versions 06 may 2023

5Hole version Printable on a Prusa sized printer (200mm YD) files start with 5btl-version- .

8Hole-Base-263mmwhide-67mmholes.stl

Hopefully fits Tershine original buckets and bottles, this version has two 3mm screw holes for top plate to be used with a thin self tapping screw.

6btl-220yd-67holes.stl's

(Will fit on a Ender 3 sized 3D printer) used a bit different design for fun.

Round-tershine .....-part8.stl has 65mm bottle holes and 269mm circumference 8btls

Round-tershine ......-part.stl has 65mm bottle holes and 222.5mm circumference 6btls

Note:

A question and concern about the fact that the models seems to be missing support edge in the lower plate has been communicated.

However ff you look closely you will find that the holes in the lower plate are tapered on the inside and about 10mm in diameter smaller that on the upper side of the base ;)

Will upload CAD files later to Grabcad ;)

Print Settings

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

20

Filament: PolyMaker PLA

Category: Tool Holders & Boxes