Worm Pit Card Holder
This 3D printable business card holder is shaped like a mouth with teeth, designed to be placed on a desk. The holder has a tongue extending out from it, which appears to be holding onto the cards. The unique design is sure to make a memorable impression on anyone who sees it. Perfect for anyone looking for a quirky and eye-catching way to keep their business cards organized.
For Best Results:
Place a card between the teeth on either side of the tongue, then the excess cards can be placed ON the tongue.
- Can be used as a Figurine Stand to display them.
- Can be used as a Phone Stand by placing your phone on the teeth and using the back side of the tongue to hold the phone.
- Printed in 2 pieces: The Mouth Piece and The Tongue.
- Scale you suit you needs in your preferred slicer.
- Print without a brim/skirt
Be sure to scale both parts equally.
- The Tongue may need to be 0.5 - 2% smaller than the Mouth Piece when scaling.
Careful when mounting the tongue in the mouth piece. ( Very snug fit through the teeth.)
Once past the Teeth should be able to press fit the tongue in the mouth, and/or superglue it together.
(Tongue may need a few small supports)
The author marked this model as their own original creation.