This bracket is based off the design of an existing metal design.
Although this can probably be printed using supports, I chose to split design in half along the YZ plane in PrusaSlicer and glue up aftewards. This also has the benefit of maximizing strength in the vertical direction. See the included .3mf file if unsure what the split looks like.
Printed with:
* PETG (PLA would probably work as well)
* 0.6 nozzle (other nozzle sizes should work, but will need to tweak the 3mf file if using)
* 0.40 layer height (also not critical)
* Recommend using variable layer for better quality round holes without increasing print tim much
The author marked this model as their own original creation.