Smart Doorbell Case for Raspberry Pi Zero 2 W

11/14/23 Update: I made the case longer so the ribbon cable does not need to bend as much.

This is a case and cover for a Raspberry Pi Zero 2 W with a display HAT and camera. It has an opening for the power and USB.

The model assumes you are using the following equipment:

• Raspberry Pi Zero 2 W
• Waveshare 1.44 inch LCD Display HAT
• Arducam for Raspberry Pi Zero Camera Module
• 4 M2 X 4MM screws (example). These are used to screw the camera module to the top cover.
• 2 M2 plastic washers (example). The washers are to give some extra height to the display HAT. The standoffs provided are slightly shorter than the pins.

Instructions on how to put it together can be found here.