TWCS VKB UCM Mount Plate

Description:

This is a mounting plate to attach the Thrustmaster TWCS throttle to the VKB UCM desk mount system. This mount functions similarly to the VKB Gladiator mounting plates, in that it has screw holes to attach to the TWCS, and additional holes to attach the plate to the UCM.

The slot at the front of the plate allows for minor adjustments left and right after having mounted it to the UCM.

Print Settings:

The following print settings worked for me

• 0.2mm layer thickness
• 20% gyroid infill
• 4 bottom layers
• 6 top layers
• 2 perimeters
• printed with PLA+
• A little bit of glue on the build plate helped prevent the points from peeling off

Parts Needed:

Attaching to TWCS

• 2x 6x1.0x16mm screws
• 2x 6mm flat washers
• 2x 6mm locking washers

Attaching to UCM

• 1x 4x0.7x20mm screw
• 1x 4mm flat washer
• 1x 4mm locking washer