Flow calibration cube - 3 walls

I know there are some other models out there. I wanted to have a simple and easy to use calibration for flow with .6 and .4 nozzles. I attached some brim around the corners for better bed adhesion. 

Please keep in mind

• Use the right model for your nozzle size (0.4mm or 0.6mm)
• The model ist made for a layer height of 0.2mm 

FlowCube_3_walls_p6 – for nozzle size 0.6mm

FlowCube_3_walls_p4 - for nozzle size 0.4mm

Flow is not the ultimate solution. Calibrate your extruder, temperature and retract settings. I would then continue with flow calibration if needed.