This is a laser cut cube with a dolphin pattern on the front face. Behind this pattern is a frosted piece of acrylic, which gives a very nice glow when there is a light behind it. The cube has a size of 100 x 100 x 100mm, so it is very nice as a decor piece on something like a shelf.
There are two cut outs on the back piece, one for a power connector and the other for a power switch. You can mount these using either hot glue or screws (depending on the type of connector and switch).
To light the piece of acrylic, I placed a short piece of PVC pipe in the cube, with an LED-strip wrapped around it. To focus all the light towards the front of the cube, I covered the inside with aluminium foil (you could use aluminium tape too, if you have that). Another option would be to glue multiple short LED strips to the inside of the back panel.
If you are interested in this cube, but you'd like to see a different design on the front, let me know! When I have the time, I could model it for you.
Support
If you'd like to support me for the 3D models I distribute for free, you can use the following AliExpress affiliate link: https://s.click.aliexpress.com/e/_AoUC8h
Whenever you buy something through this link, I get a small kickback without costs for you :)
The author marked this model as their own original creation.