Release 4 - 26-03-2024
Added a new larger and more stable version.
The glasses can also be placed open without closing the two ribs. Added gcode print file optimized for 200 degree PLA and Artillery S2 printer
The print file is set up so that only the base has a 50% fill; therefore heavier to increase stability, The shaft has a 10% fill.
The object is printed without any support because it has been designed to rest on the printing surface for the long side and this increases the resistance of the rod.
At the height of layer 228 the printing temperature will drop to 190 degrees while the fan will increase the speed to better print the embossed part of the inner circle of the base.
The top ball is placed for eye safety in an accidental way... and then, the little orange buoy helps you find your glasses! :)
The author marked this model as their own original creation.