Works Great

Worked perfectly. Printed vertically in clear PETG with auto-generated supports and cleaned up nicely. Using a 15ft USB-C extension to connect and it's been working perfectly.
I'd recommend printing the Varjo XR3-style cable clips to secure the two cables together (Velcro likes to snag on things) (edited)
How did you connect it?
I am using two of these chained together for total of 6 meters. Note that these have only one side connected so the connections are not reversible. Have to figure plug orientations by trial an error. Plugged directly to a port in motherboard.
Cable: https://www.amazon.de/-/en/Belker-Extension-Female-Charging-MacBook/dp/B09SG2QJQ1
Cover: https://www.amazon.de/-/en/locking-protector-computer-automotive-13mm-7-7m/dp/B07FXF12HC
That cover works nicely with XR-3 too, where with FT you will have a triple tether 😆
Dumb question - how did you connect it?
Just a longish USB extender? Or is there a USB connector somewhere on the Aero that i've missed?