Amazing model, thanks for sharing, I needed a special size to fit and just by slightly decreasing the percentage it was a perfect match.
A collection of shelf pegs
Makes
Comments
@davidspindola That's good to hear. Thanks for the post & rating :D
Fantastic. Printed easily and fit the first time. Thank you for sharing these!
@blakbuzzrd_255091 You're welcome. Thanks for the feedback & rating.
@Avery Thanks great to hear. Thank you for posting your feedback & rating :D
Nice collection! I am sure they are going to be handy in the future.
In this picture I had to cut of the peg in the slicer, but the hook just had the perfect size.
Printed nicely with added organic supports, used Filament is Prusament PLA Marble
@unlosing_ranger Thank you for the rating and the detailed feedback.
What a super collection of different designs! And what a brilliant early project for building your experience in Fusion360. Also loved your comment "Saving the world one shelf at a time" HAHAHAHAHAH! :o) I imagine that most people have pegs like these somewhere in the house, even if just in the kitchen cabinets, and I wonder what proportion of people have at least one missing or broken one. Yes you can generally buy them, but why do that when you can print them? I notice that the orientation recommendation has them all with the pegs horizontal, I'm guessing that's mostly to maximise strength - vertically printed pegs would mean the stress in use would be between the printed layers where a fracture could occur, while horizontal means the loading stress is across the printed lines which will be considerably stronger.
Nice job! Would have been even nicer to have the F3D file available to play with but that's your prerogative of course! (edited)
Printed 2 versions using 0.2mm layer height, 25% infill, and 3 wall loop on PLA for a little extra strength. Worked perfectly!
@CurtisB_1036537 Excellent. Thanks for rating and posting your tips.
The peg printed a little rough. But seems plenty strong in Polymaker ASA Pop Pink.
@Teslaactions Almost a match for Barbie pink.
@Joe_224841 how true. Perhaps I need to print something Barbie now. Thanks for the reminder.
@Vince Thanks for the feedback and rating :D
@nans_706363 Np, thanks for rating and posting.
Danke für die Bereitstellung der Datei. Grus Gerd Alexander
@GerdAlexander_577421 Vielen Dank für die Bewertung und das Posten Ihres Makes :D
@GiorgioMiglia Looks like a successful batch. :D
@Joe_224841 yes, I needed a few for hanging filament samples