A shock mount to isolate a sound recorder. Needs a rubber bands. A hair tie band will work just fine. The holes allow you to tighten the bands as needed use twist tie or a zip tie to secure the band via the holes if you need more tension.
PLA or PETG work okay. I printed it without supports, if you want to the model to look neater use supports or just print with more cooling.
The bottom part has a plastic ¼ tripod mount you might need to put some force to get the screw in but it works fine for me. And you will need a ¼ inch screw to use the recorders tripod mount to attach it to the top part.
If the screw is to tight you can use a tool and ¼-20 screw or a tap to make it better.
The author marked this model as their own original creation.