This is a station for the MYNT3D Printing Pen Pro.
In addition to the 3D printed parts you will need:
Finally, you will need to laser cut a 1/4" aluminum panel using theMynt 3D Station - Base.step file. If you do not have a laser cutter capable of cutting this, you can have it cut by a service like OSH Cut. Codes for a considerable discount off your first order can be found online.
Mynt 3D Station.step andMynt 3D Station.f3d are included in case you would like to make modifications to the design. Please post any iterations as a remix/make of this original design.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
20%
Filament: Hatchbox PLA Black
Notes:
Mynt 3D Station - Pen Rest.stl
* Quantity: 1x * Orientation: bottom face on print bed * Infill: 20% * Top/Bottom Layers: 4 * Walls: 3 * Supports: NoneMynt 3D Station - Foot - Back.stl
Mynt 3D Station - Foot - Print 3X.stl
Mynt 3D Station - Filament Holder.stl
Mynt 3D Station - Filament Roller.stll
NOTE: If bed adhesion is an issue for you, consider printing these parts with a brim or using an adhesive such as Magigoo.
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.