2023 Glasses

These glasses (printed with Glow filament) glow in the dark which makes them unique. You can stand out in electronic style at parties or clubs while celebrating the new year.

Simply print them as they come and mount them in a few simple steps:

1. Cut small pieces (about the width of the glasses' temples) out of any other filament.
2. Place the temples on the glasses holder and insert the filament.
3. Use a heat source or glue to fix the small piece of filament to the sides of the temple so that it does not come out.

3D PRINTING PARAMETERS

The following settings are recommended for printing:

• Prints in the original orientation and uses support (only in the joint above the nose).
• 100% fill
• Layer height of 0.15 mm or less

I printed them with 3dJacke ecoPLA Glow filament but you can use another "Glow in the dark" filament or just use a normal colored filament.