Simple cloths rail holder for Ø10mm rods to mount onto cabinet tops.
The rod can be pushed back in case you don't need the cloths rail and disappers until you pull it out again. The 2 stopper parts at the ends of the rod limit the rod from falling out.
All holes for the rod have a Ø10.5mm diameter so that Ø10mm rods should fit well.
If needed add some super glue to the stopper parts to fix them in place.
I used a 250mm long Ø10mm rod and it works fine to hang some T-Shirts and other cloths with cloth hangers to it.
The 4 screw holes have a Ø6mm diameter and a 15x5mm reduction on the top to hide the 4 screw heads.
Printing instructions:
NOTES:
Happy printing :)
The author marked this model as their own original creation.