ESP32-WROOM-32D Dupont Case

This is an awesome model! Would you be willing to make a modification to fit an ESP32-WROOM-32D DevkitC_v4? That model has a WiFi antenna that extends over the top edge of the board. I found a free 3D model of the board here to provide you with dimensions: https://grabcad.com/library/esp32-devkitc-v4-1

Thanks for your consideration. (edited)

Had to resize for my ESP32WROOMCS2 to 107.9%. Great fit, looks great.

Great design, I modified it to fit my ESP32s which is a bit longer 2mm or so and had to scale it to 102%. I added some additional air holes at the bottom and gave it some feet. I also had to move the button holes a bit. I made two of these and they work great. Thanks for the design!

Any chance to get a bottom remix adding a hole for HC-SR501 (where the suction cup is?) alongside the BH1750?

Using this design for several esp32's. I have to resize by about 107% to fit to my liking. I also made the depth of the container taller. Prints well

I also had to correct the size in my slicer, since it would not fit my board. Used 108% scaling, which seems to work nicely.

Excellent print. My ESP32 was not the right size so i have to resize the model.