Lithophane Light Photo Box with AC plug and C7 LED bulb

I decided to make my own take on the Lithophane photo light box. I wanted simple lines and I like making my own stuff. Also didn't want it battery powered. This box is multiple parts. Base, Holder, Roof, and Top roof. It also has a “top light” (print this in the same material as the Lithophane). I used an Amazon sourced light that uses C7 bulb. If you want a brighter light, just upgrade to a brighter bulb. Here is the link. https://a.co/6TucwXz 

Use this photo to lithophane site.  Follow these directions to make sure the prints fit into the box.

1. Start with a square photo
2. Upload the photo to https://3dp.rocks/lithophane/
3. Adjust the Model settings as noted
   1. Max size 118mm
   2. Thickness 3mm
   3. I added a 4mm boarder, but thats up to you
4. Slice with your favorite slicer
5. Install into the box

UPDATE

I had the wrong Holder, sorry for anyone that was printing it, just updated on 2/24/23