This is a remix of the LUCKY 13 Printable Jointed Figure inspired by The Flash from DC comics.
1h 56m
3× print file
0.15 mm
0.40 mm
6.00 g
Ender 3 V2
147
342
2
1679
updated January 5, 2023

Description

PDF

Thanks to snoozafones amazing Lucky 13 Printable Jointed Figure and inspired by Dr Operator's Sinister Six skins, I ended up creating a remix for The Flash from DC comics.

Assembly
 

You will need all of the original Lucky 13 Printable Jointed Figure regular parts except for the following remixed parts:

  • 00B06 skin waist.stl
  • 00B01 skin head.stl
  • 00B03 skin chest 1.stl

You will need the following from Lucky 13 skin: Earthworm Jim:

 

The ears will snap into the head:

The emblem will snap into the circle and then into the chest (may require glue):

 

The belt will slide down on top of the waist skin (may require glue):

 

The trim will slide onto 00B09 [2X] skin forearm:

 

 

Disclaimer

The remix pieces are sized based on my printers tolerance (which isn't the best) so you may have to resize/scale some pieces to “snap” or just use glue. Also this is my first design so please forgive if you run into issues.

 

Tags



Model origin

The author remixed this model.

Lucky 13 skin: Earthworm Jim
by Dr Operator
This source model was used for remixing before its license was restricted.

License