FingerBoard Stand

Just a modified version of the PROFB fingerboard stand. Created the sketch completely by hand with a tape measure, shortened height by just a bit and added more curvature to areas. Added my sons name on the bottom plate in a separate file that is not uploaded. Images shown have near exact sharp angles as the original, the file has been edited with more rounded edges as to not be a complete copy as imaged. 

Things to do:

• Print FB_Stand file twice
• Print FB_Brace file three times
• If you want to add a name, edit the FB_Brace file in your favorite software
• Any filament can be used, PLA was used on my side
• Infill - 20%
• Bed Temperature - 65c first layer, 55c all other layers
• Extrude Temperature - 212c
• Speed - 100%