Variable clothes rail (front-to-back with aluminium tube)

Use a 40cm depth IKEA BESTÅ as small wardrobe: just put (glue) a clothes rail in front-to-back orientation under the top board.

Length can be variable adjusted by changing the tube dimensions. Other tube diameters can be easily used by linear scaling. Not limited to IKEA ;)

Additional parts

• 4x screws 3x20mm (tube mounting)
• 4x 19x50mm double sided tape (tesa Powerbond® ULTRA STRONG)
• 30x2mm aluminum tube (33cm length for BESTA)

Print instructions

For optimal results, use your custom printer settings with the 3mf file!

Used print settings (gcode+photos)

• Layer height: 0.2mm
• Adapter-Orientation: regular
• Material: BASF Ultrafuse PRO1 (transparent)
• Supports: no

Suggested print settings

• Layer height: 0.10-0.20mm
• Material: Tough-PLA/PETG
• Supports: no

NOTES

The dimensional accuracy is critical! Depending on your material, scaling might be necessary! (use negative horizontal expansion in case the clamp or screws are not fitting)