Deer napkin rings multicolor

We made these colorful reindeer napkin rings! They are quick and easy to print, using multiple colors even if you have a single extruder machine.

Merry Christmas everyone! 🦌🎅🎄

Details

The rings have an inner diameter of 35 mm, which should be good for most cloth napkins.

The reindeers and the rings are printed separately and assembled. They lock in place as you can see in the pictures. The attachment is sturdy and secure, but if you want to you can secure them with a bit of glue (we didn't need to).

Printing details

We printed them at 0.2 mm layer height, using a 0.4 mm nozzle.

You can use PLA, which is perfectly fine. Though, we found that some filaments are more brittle than others and the attachment of the ring may be too fragile if you are planning to disassemble them after use. The ones in the photos are printed using Fillamentum's PLA Extrafill Gold Happens (affiliate link) and Prusament PLA Lipstick Red for the color inlays and Fillamentum's PLA Extrafil Traffic White (affiliate) for the contour and the back of the deers. These filaments worked perfectly for us.

The files we are sharing can be used to print the reindeers with a single color. If you split the objects into parts using PrusaSlicer, you can assign different color to each part to get multicolor prints like we did!

Follow us / support

Did you like this design? Follow us on Instagram! We are @twothingies

If you really like what we are doing and want to support us, you could buy us a coffee or two!

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only. 

If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!

If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at twothingies@gmail.com