key organizer

You can play with the infil and bottom, top layers and some color change  to create a pattern (recommend at least 5 perimeters to increase strength)

It's made to print without supports, so you will need to remove the integrated support

IMPORTANT: Check if the outer face(the one with the big circle or the hexagon one) of the models is on the print bed to improve the quality and have the benefits of the integrated support 

There are 2 sizes M(for normal length keys),L(for long keys)

There are 4 sizes of spacers depends in how thick are your keys and how many are

Hardware: 2 M3 screws with nut (The length depends on the size of the spacer + 7mm)