Sensor Display Screen Holder

I cannibalized an Ingcool 7 inch HDMI LCD screen from a previous project and wanted to set up an AIDA64 sensor display screen on my desktop. This display came from amazon.com ( https://www.amazon.com/gp/product/B08H8HZRLQ/ ). The display did not come with a case, so using it on a desktop required some kind of stand/mount to make it useful.

The stand matches this particular display's uneven bevels and holds it in place via the offset posts on the back of the display. The screen slides in from the right side and leaves the back exposed (for power and HDMI connections) and the right side exposed (for button access). The display sits at a 15 degree angle off the desktop, which works for my setup. I've included the fusion file in case anyone wants to remix it with a different angle. 

Due to the channel the screen slides into, I recommend printing face down with support enforcers painted on the underside of the top channel. I used snug supports with XY separation set to 100%. This allowed for really easy removal of the supports from the channel after printing. The included print file (for PLA) is set up this way.