NEMA-17 Brackets

My flsun prusa clone had the z-axis stepper motors on the top lifting the x-axis. The problem was that they were cantilevered out on acrylic and were very difficult to keep square. To fix the problem I made these mounts and switched the motors to push from the bottom.

Note: you must re-compile the firmware. For Marlin you need to edit Configuration.h changing #define INVERT_Z_DIR to false.

Print Settings

Printer:

flsun prusa i3 clone

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

50% or more